{"title":"Gauges \u0026 dashboard","description":"\u003cp\u003eShop the Tellers \u0026amp; Dashboard range at Motorcycles United.\u003c\/p\u003e","products":[{"product_id":"motogadget-chronoclassic-2-tacho-face-10-000-rpm-pol-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 10.000 RPM. Pol. B","description":"Black with Polished Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261004665,"sku":"415-0009","price":561.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994304k.jpg?v=1783095416"},{"product_id":"motogadget-mounting-bracket-for-motoscope-mini-black","title":"Motogadget mounting bracket for Motoscope Mini, black","description":"Black anodized. \nBracket 'A style'. \nUniversal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini to your bike. \nCan be cut and drilled to suit your specific application. \nOverall dimensions approx. 10cm high x 9cm wide. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261037433,"sku":"102-0067","price":36.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930201k.jpg?v=1783095381"},{"product_id":"motogadget-chronoclassic-2-speedo-face-black-bezel","title":"Motogadget, Chronoclassic 2 'Speedo Face'. Black bezel","description":"Black with Black Bezel. \nOn this Chronoclassic 'Speedo Face' the large classic needle indicates speed. RPM (up to 20.000 RPM) and all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261430649,"sku":"415-0007","price":553.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994307k.jpg?v=1783095417"},{"product_id":"motogadget-chronoclassic-2-tacho-face-8000-rpm-black-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 8000 RPM. Black B","description":"Black with Black Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261791097,"sku":"415-0004","price":553.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994297k.jpg?v=1783095414"},{"product_id":"motogadget-chronoclassic-2-tacho-face-8000-rpm-pol-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 8000 RPM. Pol. B","description":"Black with Polished Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261823865,"sku":"415-0008","price":553.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994298k.jpg?v=1783095414"},{"product_id":"motogadget-motoscope-tiny-standard-polished-bezel","title":"Motogadget, Motoscope Tiny. Standard. Polished bezel","description":"Black housing with polished bezel around the display. \nAnalog styled speedo but with true digital functions. Miniature, with a just 49mm diameter housing and an installation depth of 24mm. Waterproof and vibration resistant. No digital display cutout to maximize the classic analog look. Digital information will be illuminated by LEDs through the blacked-out part of the speedo, only when the ignition is turned on. All options within the speedo are controlled and adjusted with a single push button switch that can be installed anywhere. Speedo can be switched from KMH to MPH function. When 200km\/h is exceeded, the correct speed will still be shown through the blacked-out part of the speedo, up to 999km\/h. Compatible with some stock speedo sensors like Dry-Reed and inductive proximity sensors as used on stock H-D and Buell models. Comes complete with detailed instruction manual.\n- Diameter 49mm \n- Installation depth 24mm \n- Speedometer, KMH - MPH switchable \n- Speed up to 200 analog, 999 digital \n- Maximum speed \n- Odometer \n- Trip meter \n- Clock \n- Intelligent self-calibrating teach function \n- All functions can be displayed with a push on the button\n- 4 LED indicator lights. \nNote: Optional 'Tiny Streamline' mounting cups are separately available. For use with 1\" (25.4mm) or 22mm diameter handlebars or as weld-in cups, for recessed installation in fuel tank\/dashboard etc. and as 'universal brackets'. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882261954937,"sku":"18-0001","price":293.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930234k.jpg?v=1783095384"},{"product_id":"motogadget-h-d-motoscope-pro-with-clamp-black-can-bus","title":"Motogadget, H-D Motoscope Pro with clamp. Black. CAN-bus","description":"'Plug \u0026amp; Ride' CAN-bus version, complete with handlebar bracket, for a super-easy installation in 10 minutes.\nNo technical knowledge and no modifications required. \nSimply disconnect the plug of the original instrument, loosen the four screws of the handlebar clamp, screw on the Motoscope Pro with the bracket and plug the connector into the OBD socket under the seat.\nCompatible with all 11-up CAN-bus models. \nComes with a bolt-on mounting bracket and plug and play connector. \nThe Motoscope is operated identical to the original instrument via the menu button on the handlebars.\nData is processed by a 16 bit Risc processor, which drives 734 LED's for a full panel self-illuminated display matrix. Clear vision, unlike LCD, even in direct sunlight. The main and secondary displays are self-configurable, another display shows the selected gear. Fully J1850-bus driven. Apart from regular functions, the Motoscope Pro includes: Adjustable RPM scale, from 0-6000 to 0-18.000 rpm., hour meter (time in use), adjustable shift light (up to 20.000 rpm), 0-100 km\/h \/ 0-60 mph acceleration times, average speed, maximum speed, various warning functions and more. Dimensions: 109mm wide x 17mm high x 11mm deep. \nNote: The original fuel gauge cannot be displayed via the Motoscope Pro.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882262053241,"sku":"601-2439","price":628.32,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/999441k.jpg?v=1783095418"},{"product_id":"motogadget-chronoclassic-2-tacho-face-10-000rpm-black-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 10.000RPM. Black B","description":"Black with Black Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882262118777,"sku":"415-0005","price":553.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994299k.jpg?v=1783095414"},{"product_id":"motogadget-chronoclassic-2-tacho-face-14-000rpm-black-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 14.000RPM. Black B","description":"Black with Black Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882262184313,"sku":"415-0006","price":561.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994305k.jpg?v=1783095414"},{"product_id":"motogadget-chronoclassic-2-tacho-face-14-000-rpm-pol-b","title":"Motogadget, Chronoclassic 2 'Tacho Face'. 14.000 RPM. Pol. B","description":"Black with Polished Bezel. \nOn this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed \u0026amp; all other functions are shown digital in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882262446457,"sku":"415-0010","price":561.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994306k.jpg?v=1783095415"},{"product_id":"motogadget-chronoclassic-2-speedo-face-polished-bezel","title":"Motogadget, Chronoclassic 2 'Speedo Face'. Polished bezel","description":"Black with Polished Bezel. \nOn this Chronoclassic 'Speedo Face' the large classic needle indicates speed. RPM (up to 20.000 RPM) and all other functions are shown digitally in red LED's. \nWhen switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. \nThe digital display has two lines. The top line shows the gear and speed\/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. \nNote: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A \/ 936578 Breakout Box B for universal applications. \n- Dimensions: 80mm diameter x just 22mm deep\n- 11 indicator lights: Immobilizer \/ alarm (Plug \u0026amp; Ride only), Reserve, Oil temperature \/ water temperature, engine control \/ MIL \/ ABS \/ ASR (Plug \u0026amp; Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light\n- Compatible with CAN-bus vehicles \n- White illuminated pointer \/ needle \n- Shift light adjustable 0-20.000 RPM \nDigital display: \n- Gear indicator \n- Speed 999 [km\/h\/mph] \n- Trip A 999.9 [km\/mi] \n- Trip B 999.9 [km\/mi] \n- Odometer 999999 [km\/mi] \n- Oil temperature 0-200 [°C \/ °F] \n- Water temperature 0-200 [°C\/°F] \n- Air temperature -20 - 100 [°C\/°F] \n- Oil pressure 0 - 10.0 [bar\/psi] \n- Operating hours counter 9999 [h] \n- Travel time [hour\/minutes\/seconds] \n- Clock\n- Time 0-100 km\/h - 0 to 99.99 s \n- Acceleration 0 - 2.00 [G] \n- Average speed 999 [km\/h\/mph] \n- Maximum speed 999 [km\/h\/mph] \n- Maximum positive acceleration 0 - 2.00 [G] \n- Maximum negative acceleration 0 - 2.00 [G] \n- Maximum RPM digital 20.000 RPM \n- On-board voltage 9V - 18V \n- Fuel gauge 0% - 100% \nAdjustable warning messages: \n- Oil temperature \n- Water temperature \n- On-board voltage \n- Air temperature \n- Oil pressure \n- Tank capacity \n- Service interval \n- Speed warning (gear shift flash) \nChromeclassic 2 includes: \n- Instrument with 75 cm connection cable \u0026amp; plug connection \n- Cable fuse \n- Speedometer sensor with 150 cm connection cable \u0026amp; two magnets \n- Mini push button \n- Stainless steel mounting screws \n- QR code for mounting and operating instruction \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882262479225,"sku":"415-0011","price":553.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/994308k.jpg?v=1783095415"},{"product_id":"motogadget-mounting-bracket-motoscope-motosign-mini-black","title":"Motogadget mounting bracket Motoscope \u0026 Motosign Mini, black","description":"Black anodized. \nBracket 'C style'. \nUniversal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini + Motosign Mini to your bike. \nCan be cut and drilled to suit your specific application. \nOverall dimensions approx. 10cm high x 9cm wide. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882263691641,"sku":"31-0120","price":46.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930205k.jpg?v=1783095379"},{"product_id":"motogadget-mounting-bracket-motoscope-motosign-mini-pol","title":"Motogadget mounting bracket Motoscope \u0026 Motosign Mini, pol.","description":"Polished. \nBracket 'C style'. \nUniversal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini + Motosign Mini to your bike. \nCan be cut and drilled to suit your specific application. \nOverall dimensions approx. 10cm high x 9cm wide. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882263724409,"sku":"102-0070","price":72.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930210k.jpg?v=1783095379"},{"product_id":"motogadget-motosign-mini-led-indicator-polished","title":"Motogadget, Motosign mini LED indicator. Polished","description":"- Polished finish \n- Five colored LEDs in an aluminum housing  \n- Length of installed wiring harness is approx. 50cm \n- On the rear two M3 threaded holes are present for mounting \n- Weight, including wiring, just 18 grams \n- Dimensions: 46mm wide x 8mm high and 13mm deep \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882263822713,"sku":"126-0045","price":111.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930186k.jpg?v=1783095381"},{"product_id":"motogadget-msp-air-temp-sensor","title":"Motogadget, MSP air temp. sensor","description":"For motoscope pro","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264314233,"sku":"601-0211","price":47.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930332k.jpg?v=1783095404"},{"product_id":"motogadget-motoscope-tiny-standard-black-bezel","title":"Motogadget, Motoscope Tiny. Standard. Black bezel","description":"Black housing with black bezel around the display. \nAnalog styled speedo but with true digital functions. Miniature, with a just 49mm diameter housing and an installation depth of 24mm. Waterproof and vibration resistant. No digital display cutout to maximize the classic analog look. Digital information will be illuminated by LEDs through the blacked-out part of the speedo, only when the ignition is turned on. All options within the speedo are controlled and adjusted with a single push button switch that can be installed anywhere. Speedo can be switched from KMH to MPH function. When 200km\/h is exceeded, the correct speed will still be shown through the blacked-out part of the speedo, up to 999km\/h. Compatible with some stock speedo sensors like Dry-Reed and inductive proximity sensors as used on stock H-D and Buell models. Comes complete with detailed instruction manual.\n- Diameter 49mm \n- Installation depth 24mm \n- Speedometer, KMH - MPH switchable \n- Speed up to 200 analog, 999 digital \n- Maximum speed \n- Odometer \n- Trip meter \n- Clock \n- Intelligent self-calibrating teach function \n- All functions can be displayed with a push on the button\n- 4 LED indicator lights. \nNote: Optional 'Tiny Streamline' mounting cups are separately available. For use with 1\" (25.4mm) or 22mm diameter handlebars or as weld-in cups, for recessed installation in fuel tank\/dashboard etc. and as 'universal brackets'. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264379769,"sku":"27-0021","price":293.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930233k.jpg?v=1783095384"},{"product_id":"motogadget-reed-speedo-sensor-m5-threaded","title":"Motogadget, Reed speedo sensor M5 threaded","description":"Universal stainless steel Reed sensor for a variety of instruments. Suitable for all Motogadget instruments. Reacts to magnetic fields on rotating parts. Sensor is threaded and comes with two nuts for easy mounting. Two strong \u0026amp; small neodymium magnets included. \n- Dry Reed contact \n- M8 threaded \n- Sturdy design \n- Stainless steel \n- Cable length 150cm \n- With two nuts for easy mounting \n- Great speedo drive solution for Motogadget's Motoscope instruments and many others \n- Comes with 2 neodymium magnets.  \nNote: See 930294 for a optional or replacement neodymium magnet pack.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264707449,"sku":"930240","price":49.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930240k.jpg?v=1783095391"},{"product_id":"motogadget-motoscope-tiny-speedster-polished-bezel","title":"Motogadget, Motoscope Tiny. Speedster. Polished bezel","description":"Black housing with polished bezel around the display. \nAnalog styled speedo but with true digital functions. Miniature, with a just 49mm diameter housing and an installation depth of 24mm. Waterproof and vibration resistant. No digital display cutout to maximize the classic analog look. Digital information will be illuminated by LEDs through the blacked-out part of the speedo, only when the ignition is turned on. All options within the speedo are controlled and adjusted with a single push button switch that can be installed anywhere. Speedo can be switched from KMH to MPH function. When 200km\/h is exceeded, the correct speed will still be shown through the blacked-out part of the speedo, up to 999km\/h. Compatible with some stock speedo sensors like Dry-Reed and inductive proximity sensors as used on stock H-D and Buell models. Comes complete with detailed instruction manual.\n- Diameter 49mm \n- Installation depth 24mm \n- Speedometer, KMH - MPH switchable \n- Speed up to 200 analog, 999 digital \n- Maximum speed \n- Odometer \n- Trip meter \n- Clock \n- Intelligent self-calibrating teach function \n- All functions can be displayed with a push on the button\n- 4 LED indicator lights. \nNote: Optional 'Tiny Streamline' mounting cups are separately available. For use with 1\" (25.4mm) or 22mm diameter handlebars or as weld-in cups, for recessed installation in fuel tank\/dashboard etc. and as 'universal brackets'. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264740217,"sku":"33-0007","price":293.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930241k.jpg?v=1783095391"},{"product_id":"motogadget-motoscope-tiny-speedster-black-bezel","title":"Motogadget, Motoscope Tiny. Speedster. Black bezel","description":"Black housing with black bezel around the display. \nAnalog styled speedo but with true digital functions. Miniature, with a just 49mm diameter housing and an installation depth of 24mm. Waterproof and vibration resistant. No digital display cutout to maximize the classic analog look. Digital information will be illuminated by LEDs through the blacked-out part of the speedo, only when the ignition is turned on. All options within the speedo are controlled and adjusted with a single push button switch that can be installed anywhere. Speedo can be switched from KMH to MPH function. When 200km\/h is exceeded, the correct speed will still be shown through the blacked-out part of the speedo, up to 999km\/h. Compatible with some stock speedo sensors like Dry-Reed and inductive proximity sensors as used on stock H-D and Buell models. Comes complete with detailed instruction manual.\n- Diameter 49mm \n- Installation depth 24mm \n- Speedometer, KMH - MPH switchable \n- Speed up to 200 analog, 999 digital \n- Maximum speed \n- Odometer \n- Trip meter \n- Clock \n- Intelligent self-calibrating teach function \n- All functions can be displayed with a push on the button\n- 4 LED indicator lights. \nNote: Optional 'Tiny Streamline' mounting cups are separately available. For use with 1\" (25.4mm) or 22mm diameter handlebars or as weld-in cups, for recessed installation in fuel tank\/dashboard etc. and as 'universal brackets'. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264805753,"sku":"18-0002","price":293.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930243k.jpg?v=1783095391"},{"product_id":"motogadget-motoscope-tiny-vintage-brass","title":"Motogadget, Motoscope Tiny. Vintage. Brass","description":"Black housing with an old brass bezel around the display. Brass pointer for that vintage styling. \nAnalog styled speedo but with true digital functions. Miniature, with a just 49mm diameter housing and an installation depth of 24mm. Waterproof and vibration resistant. No digital display cutout to maximize the classic analog look. Digital information will be illuminated by LEDs through the blacked-out part of the speedo, only when the ignition is turned on. All options within the speedo are controlled and adjusted with a single push button switch that can be installed anywhere. Speedo can be switched from KMH to MPH function. When 200km\/h is exceeded, the correct speed will still be shown through the blacked-out part of the speedo, up to 999km\/h. Compatible with some stock speedo sensors like Dry-Reed and inductive proximity sensors as used on stock H-D and Buell models. Comes complete with detailed instruction manual.\n- Diameter 49mm \n- Installation depth 24mm \n- Speedometer, KMH - MPH switchable \n- Speed up to 200 analog, 999 digital \n- Maximum speed \n- Odometer \n- Trip meter \n- Clock \n- Intelligent self-calibrating teach function \n- All functions can be displayed with a push on the button\n- 4 LED indicator lights. \nNote: Optional 'Tiny Streamline' mounting cups are separately available. For use with 1\" (25.4mm) or 22mm diameter handlebars or as weld-in cups, for recessed installation in fuel tank\/dashboard etc. and as 'universal brackets'. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882264871289,"sku":"18-0022","price":350.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930244k.jpg?v=1783095391"},{"product_id":"motogadget-motoscope-pro","title":"Motogadget, Motoscope Pro","description":"Data is processed by a 16 bit Risc processor, which drives 734 LED's for a full panel self-illuminated display matrix. Clear vision, unlike LCD, even in direct sunlight. The main and secondary displays are self-configurable, another display shows the selected gear. Fully J1850-bus driven. Apart from regular functions, the Motoscope Pro includes: Adjustable RPM scale, from 0-6000 to 0-18.000 RPM., hour meter (time in use), adj. shift light (up to 20.000RPM), 0-100 km\/h \/ 0-60 mph acceleration times, average speed, maximum speed, various warning functions and more. \r\nDimensions: 109mm wide x 17mm high x 11mm deep. \r\nNote: Breakout box required for H-D J1850-bus. \r\nNote: Breakout Box A (936577) or Breakout box B (936578) are available to make universal indicator light connections.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882266182009,"sku":"27-0006","price":425.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930269k.jpg?v=1783095388"},{"product_id":"motogadget-msm-combi-frame-with-indicator-lights-polished","title":"Motogadget, MSM Combi Frame with indicator lights. Polished","description":"Polished CNC machined aluminum. \nUsed to install the Motogadget Motoscope Mini digital instrument \/ speedometer. \nThis Combi frame comes complete with 5 pre-installed LED indicator lights in, left to right, green, blue, green, red, orange. \nIncludes 50cm of pre-install wiring harness for the indicator lights.  \nNote: For installation a Combi Frame bracket clip kit bracket, Combi Frame bolt-on bracket, Combi Frame weld-in bracket or Combi Frame retaining plate is required for mounting. The Motoscope Mini is not included. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882266345849,"sku":"31-0128","price":142.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930277k.jpg?v=1783095393"},{"product_id":"motogadget-msm-combi-frame-with-indicator-lights-black","title":"Motogadget, MSM Combi Frame with indicator lights. Black","description":"Black anodized CNC machined aluminum. \nUsed to install the Motogadget Motoscope Mini digital instrument \/ speedometer. \nThis Combi frame comes complete with 5 pre-installed LED indicator lights in, left to right, green, blue, green, red, orange. \nIncludes 50cm of pre-install wiring harness for the indicator lights. \nNote: For installation a Combi Frame bracket clip kit bracket, Combi Frame bolt-on bracket, Combi Frame weld-in bracket or Combi Frame retaining plate is required for mounting. The Motoscope Mini is not included. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882266411385,"sku":"31-0099","price":133.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930280k.jpg?v=1783095394"},{"product_id":"motogadget-reed-speedo-sensor-m5-threaded-1","title":"Motogadget, Reed speedo sensor M5 threaded","description":"Universal stainless steel Reed sensor for a variety of instruments. Suitable for all Motogadget instruments. Reacts to magnetic fields on rotating parts. Sensor is threaded and comes with two nuts for easy mounting. Two strong \u0026amp; small neodymium magnets included. \n- Dry Reed contact \n- M8 threaded \n- Sturdy design \n- Stainless steel \n- Cable length 150cm \n- With two nuts for easy mounting \n- Great speedo drive solution for Motogadget's Motoscope instruments and many others \n- Comes with 2 neodymium magnets.  \nNote: See 930294 for a optional or replacement neodymium magnet pack.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882266902905,"sku":"31-0168","price":94.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930285k.jpg?v=1783095394"},{"product_id":"motogadget-oil-pressure-sensor","title":"Motogadget, oil pressure sensor","description":"M10 x 1.0 threaded, self sealing. Universal use as oil pressure sensor for an oil pressure gauge. \nNote: For use with an oil pressure gauge only. Not for use for on\/off function of oil pressure indicator lights.\n- Total length incl. thread and connections: 80 mm \n- Maximum diameter: 46 mm. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882267427193,"sku":"31-0070","price":72.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/997977k.jpg?v=1783095416"},{"product_id":"motogadget-motoscope-mini-digital-gauge-polished","title":"Motogadget, Motoscope mini - digital gauge, polished","description":"Functions include Speedometer 0-999 kmh. or mph., trip meter 0-999,99 km or miles, total odometer 0-99.999 km or miles, trip time 0-99:99 hours, tachometer as numbers 0-20.000 rpm, tachometer as light bar 0-10.000 rpm and shift light 0-20.000 rpm. Includes a Reed wheel sensor with 1.5m cable for the speedometer function in custom applications, although the Motoscope is compatible with, and can be connected to, most stock speedo sensors that might already be in use on the bike. Calibrations are done when it is installed. Small threaded nuts are installed on rear side and mount brackets can be ordered separately. \nDimensions: 59mm wide x 21.5mm high x 13mm deep. Weight 32 grams. \n- Polished. \nNote: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882267623801,"sku":"27-0051","price":286.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930171k.jpg?v=1783095374"},{"product_id":"motogadget-tachometer-sensor","title":"Motogadget tachometer sensor","description":"Installs, with included cable ties, to any supression core spark plug wire. The sensor will pick-up the ignition current spike and electronically drive the tachometer. Can be used with all ignitions, like CDI or magneto, where a regular coil with tachometer attachment is not present.\r\nNote: Sensor must be used with interference suppression spark plugs or spark plug caps only. \r\nNote: Not waterproof. \r\nNote: Advised for use with digital stepper motor driven Motogadget tachometers only.","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882268475769,"sku":"31-0122","price":110.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930302k.jpg?v=1783095395"},{"product_id":"motogadget-motoscope-mini-digital-gauge-black","title":"Motogadget, Motoscope mini - digital gauge, black","description":"Functions include Speedometer 0-999 kmh. or mph., trip meter 0-999,99 km or miles, total odometer 0-99.999 km or miles, trip time 0-99:99 hours, tachometer as numbers 0-20.000 rpm, tachometer as lightbar 0-10.000 rpm and shift light 0-20.000 rpm. Includes a Reed wheel sensor with 1.5m cable for the speedometer function in custom applications, although the Motoscope is compatible with, and can be connected to, most stock speedo sensors that might already be in use on the bike. Calibrations are done when it is installed. Small threaded nuts are installed on rear side and mount brackets can be ordered separately. \nDimensions: 59mm wide x 21.5mm high x 13mm deep. Weight 32 grams. \n- Black anodized. \nNote: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.\n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882268639609,"sku":"27-0050","price":276.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930173k.jpg?v=1783095374"},{"product_id":"motogadget-speedo-sensor-bmw-boxer-aircooled","title":"Motogadget, Speedo Sensor BMW Boxer Aircooled","description":null,"brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882268868985,"sku":"31-0586","price":64.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/963333k.jpg?v=1783095412"},{"product_id":"motogadget-temperature-sensor","title":"Motogadget, water-oil temperature sensor","description":"M10 x 1.0 threaded. Universal use as water temperature sensor or oil temperature sensor. ","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882268901753,"sku":"31-0123","price":47.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/997976k.jpg?v=1783095417"},{"product_id":"motogadget-motosign-mini-led-indicator-black","title":"Motogadget, Motosign mini LED indicator. Black","description":"- Black anodized finish \n- Five colored LEDs in an aluminum housing \n- Length of installed wiring harness is approx. 50cm \n- On the rear two M3 threaded holes are present for mounting \n- Weight, including wiring, just 18 grams \n- Dimensions: 46mm wide x 8mm high and 13mm deep \n","brand":"Motogadget","offers":[{"title":"Default Title","offer_id":63882270212473,"sku":"31-0104","price":99.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/930185k.jpg?v=1783095378"},{"product_id":"biltwell-digital-softail-dash-panel-housing-black","title":"Biltwell, digital Softail dash panel housing. Black","description":"Black electroplated. CNC T-6 machined aluminum, used to mount the OEM 70900651\/A\/B, 70900655\/A\/B digital dash on M8 Street Bob and Breakout models. Designed to clamp to the uprights, or risers, of T-Bar style handlebars. Fits 1-1\/4\" diameter bar and includes shims to fit 1\" handlebars. Easy to install with the 2-piece style mount. Comes with 5\/16-18 stainless allen cap hardware.","brand":"Biltwell","offers":[{"title":"Default Title","offer_id":63882367304057,"sku":"98-7174","price":115.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/580331k.jpg?v=1783096070"},{"product_id":"biltwell-digital-softail-dash-panel-housing-chrome","title":"Biltwell, digital Softail dash panel housing. Chrome","description":"Chrome. CNC T-6 machined aluminum, used to mount the OEM 70900651\/A\/B \/ 70900655\/A\/B digital dash on M8 FXST Standard, FXLRST Low Rider Street Bob and Breakout models. Designed to clamp to the uprights, or risers, of T-Bar style handlebars. Fits 1-1\/4\" diameter bar and includes shims to fit 1\" handlebars. Easy to install with the 2-piece style mount. Comes with 5\/16-18 stainless allen cap hardware.","brand":"Biltwell","offers":[{"title":"Default Title","offer_id":63882369270137,"sku":"98-1930","price":115.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/580332k.jpg?v=1783096084"},{"product_id":"motone-street-twin-speedo-bracket-black","title":"Motone, Street Twin speedo bracket. Black","description":"The stock Triumph Street Twin is designed from the factory with a one-piece headlamp and speedo bracket assembly. If you want to change the headlamp bracket, or to mount the headlamp differently, you'll need a bracket that will mount the speedo as well. This Motone speedo bracket is structurally braced for strength, manufactured using high pressure die casting and does it all.","brand":"Motone","offers":[{"title":"Default Title","offer_id":63884079923577,"sku":"35-0007","price":64.43,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/905844m.jpg?v=1783156212"},{"product_id":"motone-lay-flat-gauge-mount-black","title":"Motone, lay flat gauge mount. Black","description":"Machined from billet 606 T6 aluminum sheet and finished in hard black anodized. This version includes facility to mount the ignition to between the clocks as well as lowering them. \r\n\r\nNote: This bracket lays the clocks flat so they are aligned with the triple trees allowing a much cleaner looking front end. You will need to lower the headlight to fit the clocks flat at this angle. Motone also make custom headlight and turn signal brackets to make this possible.","brand":"Motone","offers":[{"title":"Default Title","offer_id":63884081758585,"sku":"31-0166","price":47.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/905841m.jpg?v=1783156212"},{"product_id":"fl-speedometer-62-67-electra-face-black-silver-1-1-mph","title":"FL speedometer, '62-67 electra face', black\/silver. 1:1 mph","description":"With 5\/8-18 threaded speedo cable connector. \r\nFor your reference only:  For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. \r\nMost FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. \r\nNote: 1991-up turn signals will no longer self cancel. \r\n- 60 M.P.H. = 1000 R.P.M. (= 1:1) \r\n- 60 M.P.H. = 2000 R.P.M. (= 2:1) \r\n- 60 M.P.H. = 2240 R.P.M. (= 2.24:1) \r\n- 60 K.M.H. = 700 R.P.M. (= 1:1) \r\n- 60 K.M.H. = 1400 R.P.M. (= 2:1)","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884092080505,"sku":"600-0035","price":88.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500203k.jpg?v=1783164300"},{"product_id":"fl-speedometer-62-67-electra-face-black-silver-2-1-mph","title":"FL speedometer, '62-67 electra face', black\/silver. 2:1 mph","description":"With 5\/8-18 threaded speedo cable connector. \r\nFor your reference only:  For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. \r\nMost FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. \r\nNote: 1991-up turn signals will no longer self cancel. \r\n- 60 M.P.H. = 1000 R.P.M. (= 1:1) \r\n- 60 M.P.H. = 2000 R.P.M. (= 2:1) \r\n- 60 M.P.H. = 2240 R.P.M. (= 2.24:1) \r\n- 60 K.M.H. = 700 R.P.M. (= 1:1) \r\n- 60 K.M.H. = 1400 R.P.M. (= 2:1)","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884092146041,"sku":"600-0036","price":88.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500204k.jpg?v=1783164300"},{"product_id":"fl-speedometer-74-84-face-black-1-1-mph","title":"FL speedometer, '74-84 face', black. 1:1 mph","description":"With 5\/8-18 threaded speedo cable connector. \r\nFor your reference only:  For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. \r\nMost FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. \r\nNote: 1991-up turn signals will no longer self cancel. \r\n- 60 M.P.H. = 1000 R.P.M. (= 1:1) \r\n- 60 M.P.H. = 2000 R.P.M. (= 2:1) \r\n- 60 M.P.H. = 2240 R.P.M. (= 2.24:1) \r\n- 60 K.M.H. = 700 R.P.M. (= 1:1) \r\n- 60 K.M.H. = 1400 R.P.M. (= 2:1)","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884092211577,"sku":"600-0037","price":88.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500206k.jpg?v=1783164301"},{"product_id":"68-95-airglide-dash-cover-chrome","title":"68-95 'Airglide' dash cover. Chrome","description":"Chrome plated injection molded plastic.","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884093489529,"sku":"600-0048","price":179.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500281k.jpg?v=1783164303"},{"product_id":"electronic-cnc-aluminum-speedometer-mph-chrome","title":"Electronic cnc aluminum speedometer (mph) chrome","description":"Displays speed, total distance and trip meter. LEDs are used for tachometer. Includes high\/low beam, turn signal, oil and neutral light. Dimensions 110mm x 57mm x 37,5 mm. \r\n\r\nNote: For matching handlebar mount bracket see 500479 (chrome) or 500744 (black).","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884093784441,"sku":"500412","price":364.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500412k.jpg?v=1783164310"},{"product_id":"electronic-cnc-aluminum-speedometer-kmh-chrome","title":"Electronic cnc aluminum speedometer (kmh) chrome","description":"Displays speed, total distance and trip meter. LEDs are used for tachometer. Includes high\/low beam, turn signal, oil and neutral light. Dimensions 110mm x 57mm x 37,5 mm. \r\n\r\nNote: For matching handlebar mount bracket see 500479 (chrome) or 500744 (black).","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884093817209,"sku":"603-3879","price":12.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500413k.jpg?v=1783164305"},{"product_id":"73-84-fx-electronic-tachometer","title":"73-84 FX electronic tachometer","description":"OEM style reproduction metal dash mounted tachometer. Replacement for 92042-78A","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094177657,"sku":"600-0056","price":88.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500450k.jpg?v=1783164311"},{"product_id":"electronic-cnc-aluminum-speedometer-mph-black","title":"Electronic cnc aluminum speedometer (mph) black","description":"Black wrinkle finish. Displays speed, total distance and trip meter. LEDs are used for tachometer. Includes high\/low beam, turn signal, oil and neutral light. Dimensions 110mm x 57mm x 37,5 mm. \r\n\r\nNote: For matching handlebar mount bracket see 500479 (chrome) or 500744 (black).","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094472569,"sku":"600-0061","price":244.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500477k.jpg?v=1783164306"},{"product_id":"electronic-cnc-aluminum-speedometer-kmh-black","title":"Electronic cnc aluminum speedometer (kmh) black","description":"Black wrinkle finish. Displays speed, total distance and trip meter. LEDs are used for tachometer. Includes high\/low beam, turn signal, oil and neutral light. Dimensions 110mm x 57mm x 37,5 mm. \r\n\r\nNote: For matching handlebar mount bracket see 500479 (chrome) or 500744 (black).","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094538105,"sku":"600-0062","price":262.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500477k_1059e6ed-3670-46d8-97c0-e2903557b42c.jpg?v=1783164317"},{"product_id":"speedometer-mounting-bracket-chrome","title":"Speedometer mounting bracket chrome","description":"Used to mount speedo to 1\", 1-1\/4\" or 1-1\/2\" diameter handlebars. Takes 500413,500478,500477, 500412 speedos.","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094636409,"sku":"600-0063","price":49.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500479k.jpg?v=1783164317"},{"product_id":"fx-speedometer-mph-2-1-ratio-early-style-face","title":"FX speedometer MPH. 2:1 ratio. Early style face","description":"OEM style reproduction metal dash mounted speedometer. OEM reference 67020-73B.","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094865785,"sku":"91-0065","price":84.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500515k.jpg?v=1783164306"},{"product_id":"fx-speedometer-mph-2-1-ratio-late-style-face","title":"FX speedometer MPH. 2:1 ratio. Late style face","description":"OEM style reproduction metal dash mounted speedometer. OEM reference 67020-73B.","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094931321,"sku":"500516","price":83.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500516k.jpg?v=1783164318"},{"product_id":"fl-speedometer-36-40-face-white-1-1-mph","title":"FL speedometer, '36-40 face', white. 1:1 mph","description":"With 5\/8-18 threaded speedo cable connector. \r\nFor your reference only:  For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. \r\nMost FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. \r\nNote: 1991-up turn signals will no longer self cancel. \r\n- 60 M.P.H. = 1000 R.P.M. (= 1:1) \r\n- 60 M.P.H. = 2000 R.P.M. (= 2:1) \r\n- 60 M.P.H. = 2240 R.P.M. (= 2.24:1) \r\n- 60 K.M.H. = 700 R.P.M. (= 1:1) \r\n- 60 K.M.H. = 1400 R.P.M. (= 2:1)","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884094996857,"sku":"600-0068","price":88.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500517k.jpg?v=1783164319"},{"product_id":"fl-speedometer-36-40-face-white-2-1-mph","title":"FL speedometer, '36-40 face', white. 2:1 mph","description":"With 5\/8-18 threaded speedo cable connector. \r\nFor your reference only:  For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. \r\nMost FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. \r\nNote: 1991-up turn signals will no longer self cancel. \r\n- 60 M.P.H. = 1000 R.P.M. (= 1:1) \r\n- 60 M.P.H. = 2000 R.P.M. (= 2:1) \r\n- 60 M.P.H. = 2240 R.P.M. (= 2.24:1) \r\n- 60 K.M.H. = 700 R.P.M. (= 1:1) \r\n- 60 K.M.H. = 1400 R.P.M. (= 2:1)","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884095029625,"sku":"600-0069","price":88.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500518k.jpg?v=1783164319"},{"product_id":"oil-pressure-switch-wrench","title":"Oil pressure switch wrench","description":"Used to remove and install oil pressure sending units without damage. Fits switches that replace OEM 26561-84 and 26554-77B.","brand":"MCS","offers":[{"title":"Default Title","offer_id":63884247368057,"sku":"600-0082","price":27.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0010\/7641\/files\/500557k.jpg?v=1783164321"}],"url":"https:\/\/motorcyclesunited.com\/collections\/parts-tellers-and-dashboard.oembed","provider":"Motorcycles United","version":"1.0","type":"link"}